LogoLogo
  • RouterOS Scripts
  • Scripts
    • Forward log messages via notification
    • Mode button with multiple presses
    • Import SSH keys
    • Act on received SMS
    • Install LTE firmware upgrade
    • Visualize OSPF state via LEDs
    • Use wireless network with daily psk
    • Find and remove access list duplicates
    • Create DNS records for DHCP leases
    • Manage remote logging
    • Forward received SMS
    • Collect MAC addresses in wireless access list
    • Notify about health state
    • Update configuration on IPv6 prefix change
    • Renew certificates and notify on expiration
    • Renew locally issued certificates
    • Upload backup to server
    • Play Super Mario theme
    • Manage IP addresses with bridge status
    • Notify on LTE firmware upgrade
    • Run scripts on ppp connection
    • Run other scripts on DHCP lease
    • Update GRE configuration with dynamic addresses
    • Manage system update
    • Manage LEDs dark mode
    • Upload backup to Mikrotik cloud
    • Send GPS position to server
    • Rotate NTP servers
    • Manage ports in bridge
    • Update tunnelbroker configuration
    • Notify on host up and down
    • Notify on RouterOS update
    • Send notification with early errors
    • Use WPA2 network with hotspot credentials
    • Send backup via e-mail
    • Run rolling CAP upgrades from CAPsMAN
    • Wait for configuration und functions
    • Download packages for CAP upgrade from CAPsMAN
    • Comment DHCP leases with info from access list
  • Initial commands
  • COPYING
Powered by GitBook
On this page
  • Description
  • Requirements and installation
  • Configuration
  • See also

Was this helpful?

  1. Scripts

Update tunnelbroker configuration

PreviousManage ports in bridgeNextNotify on host up and down

Last updated 4 years ago

Was this helpful?

Description

Connecting to from dynamic public ip address requires the address to be sent to the remote, and to be set locally. This script does both.

Requirements and installation

Just install the script:

$ScriptInstallUpdate update-tunnelbroker;

Installing makes this script run when ever a ppp connection is established.

Configuration

The configuration goes to interface's comment:

/ interface 6to4 set comment="tunnelbroker, user=user, pass=s3cr3t, id=12345" tunnelbroker;

Also enabling dynamic DNS in Mikrotik cloud is required:

/ ip cloud set ddns-enabled=yes;

See also

◀ Go back to main README
tunnelbroker.net
ppp-on-up
Run scripts on ppp connection
◀ Go back to main README
▲ Go back to top