LogoLogo
  • RouterOS Scripts
  • Scripts
    • Forward log messages via notification
    • Mode button with multiple presses
    • Import SSH keys
    • Act on received SMS
    • Install LTE firmware upgrade
    • Visualize OSPF state via LEDs
    • Use wireless network with daily psk
    • Find and remove access list duplicates
    • Create DNS records for DHCP leases
    • Manage remote logging
    • Forward received SMS
    • Collect MAC addresses in wireless access list
    • Notify about health state
    • Update configuration on IPv6 prefix change
    • Renew certificates and notify on expiration
    • Renew locally issued certificates
    • Upload backup to server
    • Play Super Mario theme
    • Manage IP addresses with bridge status
    • Notify on LTE firmware upgrade
    • Run scripts on ppp connection
    • Run other scripts on DHCP lease
    • Update GRE configuration with dynamic addresses
    • Manage system update
    • Manage LEDs dark mode
    • Upload backup to Mikrotik cloud
    • Send GPS position to server
    • Rotate NTP servers
    • Manage ports in bridge
    • Update tunnelbroker configuration
    • Notify on host up and down
    • Notify on RouterOS update
    • Send notification with early errors
    • Use WPA2 network with hotspot credentials
    • Send backup via e-mail
    • Run rolling CAP upgrades from CAPsMAN
    • Wait for configuration und functions
    • Download packages for CAP upgrade from CAPsMAN
    • Comment DHCP leases with info from access list
  • Initial commands
  • COPYING
Powered by GitBook
On this page
  • Description
  • Requirements and installation
  • Usage and invocation
  • See also

Was this helpful?

  1. Scripts

Find and remove access list duplicates

PreviousUse wireless network with daily pskNextCreate DNS records for DHCP leases

Last updated 4 years ago

Was this helpful?

Description

This script is supposed to run interactively to find and remove duplicate entries in wireless access list.

Requirements and installation

Depending on whether you use CAPsMAN (/ caps-man) or local wireless interface (/ interface wireless) you need to install a different script.

For CAPsMAN:

$ScriptInstallUpdate accesslist-duplicates.capsman;

For local interface:

$ScriptInstallUpdate accesslist-duplicates.local;

Usage and invocation

Run this script from a terminal:

[admin@kalyke] > / system script run accesslist-duplicates.local
Flags: X - disabled
 0   ;;; First entry with identical mac address...
     mac-address=00:11:22:33:44:55 interface=any signal-range=-120..120 allow-signal-out-of-range=10s authentication=yes forwarding=yes ap-tx-limit=0 client-tx-limit=0 private-algo=none private-key="" private-pre-shared-key=""  management-protection-key="" vlan-mode=default vlan-id=1

 1   ;;; Second entry with identical mac address...
     mac-address=00:11:22:33:44:55 interface=any signal-range=-120..120 allow-signal-out-of-range=10s authentication=yes forwarding=yes ap-tx-limit=0 client-tx-limit=0 private-algo=none private-key="" private-pre-shared-key="" management-protection-key="" vlan-mode=default vlan-id=1

Numeric id to remove, any key to skip!
Removing numeric id 1...

See also

◀ Go back to main README
Collect MAC addresses in wireless access list
◀ Go back to main README
▲ Go back to top